Bird Pigeon Foot Ring Injectioin Molding Machine
Bird ring foot ring injection molding making machine is used for making bird foot rings for pigeon and other pet bird.
The machine can cover the aluminium ring by a plastic cover. The color paper with letters can be sealed in it for distinguish purpose.
The injection effect is perfectly tight, no any water can goes into it.
3.Vertical clamping, vertical injection, especially good at studded products molding.
4. Fast speed, low pressure safety clamping, mold auto-open when abnormal happen, a unique safety design.
5. Automatic fault display and maintenance easy.
6.Electric control and hydraulic parts adopt famous brand, quiet, precise and durable.
7.Multi-zone temperature control, multi-stage injection pressure, injection speed, back pressure stepless adjustment, for precision diamond wire saw molding.
|Theoretical Shot Volume(cm3)||47|
|Max Shot Weight[PS](g/oz)||42/1.5|
|Screw Speed (rpm)||0-160|
|Nozzle Contact Force(ton)||2.5|
|Nozzle Retraction Stroke (mm)||120|
|Stages/Number of Temperature Control（Zone）||3|
|Distance Between Columns(mm)Distance Between Tie Bar||310×160|
|Min. Mold Thickness(mm)||80|
|Mold Opening Stroke(mm)||200|
|Max. Opening Distance(mm)||280|
|Max. Hydraulic Pressure(Mpa)||14|
|Oil Pump Output(L/min)||40|
|Oil Tank Capacity(L)||100|
|Cooling Water Consumption(L/h)||400-600|
|Pump Motor Power(KW)||2.2(3HP)|
|Barrel Heating Power(KW)||1.8|
|Machine Packing Size(mm)||1400×1000×2300|
Note: by technology progress , the above specifications are subject to change without prior notice!